Tug Boat Fender

High energy absorption and reasonable reaction force.

The fender is applicable for all kinds of docks, quays, and ships.

Good performance during angle berthing.

A square tug boat fender is a type of marine fendering system specifically designed for tugboats, which are often used for pushing or towing other vessels in harbors, terminals, or offshore environments. The "square" refers to the cross-sectional shape, which is typically square or rectangular, providing a large, flat contact surface. Commonly, it would be mounted on the bow, stern, or sides of tugboats to provide cushioning during contact with other ships or structure. It is designed to absorb impact and protect the tugboat during docking when it is pushing or pulling other vessels.

A square tug boat fender is made from vulcanized natural rubber, EPDM, or other high-performance synthetic rubbers designed to withstand extreme marine conditions, UV rays, saltwater, and oil exposure.

Cross-section: 200mm x 200mm, 300mm x 300mm, or custom

Length: typically 1 to 3 meters, or continuous sections

Mounting holes: pre-drilled or custom as per vessel design

We can also provide customized tug boat fender according to the specific tugboat size and mission.

High energy absorption and resistance to abrasion.

Simple installation and replacement.

Versatile shape allows them to be used on flat or slightly curved surfaces.

It can distributes forces over a large surface area to protect both the tug and the vessel or structure being pushed.

Easy to install, can be bolted, chained, or inserted into custom steel brackets on the tug.

Type: solid or hollow core (optional keyhole or D-bore)

Material: natural/synthetic rubber (NR, SBR, or EPDM), UV-resistant

Optional: Reinforced steel plates or with internal fabric layers

Certificate: ABS, DNV, LR, BV, CCS, and other classification society standards

Customized service is available