Blog

Different types of propellers and their applications Fixed pitch propellers: This type of propeller has a fixed pitch and is suitable for most commercial and military ships. Adjust

The design of the propeller has been scientifically optimized, and its various technical parameters can maximize the combined effect, generating sufficient thrust to drive the ship

The propeller rotates through the power transmitted by the engine, using its blades to cut seawater and push it backwards, generating forward thrust. This thrust is achieved throug

The main function of marine propellers is to generate thrust through rotation, pushing the ship forward. As a key component of a ship's power system, the propeller is powered b

The installation of ship doors needs to follow certain steps, including determining the position, reinforcing the door frame, welding and fixing, etc. The specific steps are as fol

Material: Ship doors are usually made of corrosion-resistant metal materials, such as stainless steel or aluminum alloy, to ensure that they are not easily damaged in marine enviro

The characteristics of ship doors mainly include the following aspects: Corrosion resistance: Ship doors need to have good corrosion resistance to cope with salt spray and humid co

The function of ship doors is to control the entry and exit of personnel and cargo: Ship doors can be used to control the entry and exit of personnel and cargo inside the ship, inc

Watertight door: an entrance and exit installed on the watertight bulkhead below the deck of a ship, mainly used to prevent the hull from being submerged in water when it breaks. T

The function of ship doors is to control the entry and exit of personnel and cargo: Ship doors can be used to control the entry and exit of personnel and cargo inside the ship, inc

ZHIYOU MARINE's general manager Eric Song received distinguished guests from Southeast Asia and took them to visit the production workshop. With the recovery of the shipping ma

The propeller is mounted on the tail of the hull and consists of a few blades and a hub. The hub is a truncated cone that is connected to the tail shaft to transfer the load. The p