Marine Floating Jetty Platform

Marine floating jetty platform can be used for Floating Dock, Floating Platform,Floating Bridge,Jet Ski Dock, Drive On Dock, Fish Farm,Swimming Pool etc, which are widely used in various fields. Our floating pontoons are made of high-quality HDPE material through one-time blow molding. This manufacturing process ensures they have excellent durability and stability.

Floating dock has a strong buoyancy, which can remain stable on the water surface. With features like being anti-corrosion, anti-aging and UV-resistant, marine floating jetty platform can withstand harsh outdoor environments. Our floating pontoon comes in different sizes and colors to meet various needs. Whether for marking water walkways, docking jetski, building floating platforms or fish farming, they are your reliable choice. New maritime will provide long-term and good service for you.

Floating Dock Features

Pontoon size: 500x500x400mm

Single weight: 7kg±0.3kg

Material: High Density Polyethylene (HDPE)

Strong load capacity: 350kg/m2

Colour: Blue, gray, orange, black and beige customized

Lifespan: over 15 years

Thickness: The thinnest part is 5mm, Four ears(corners) are the thickest. The ears(corners) are solid.

UV protection: floating pontoon dock Waterproof Durable pontoon

Preference Temperature: -60°C/+80°C

Advantages
1.Safety: with patterns on the top surface, marine floating jetty platform is free from dangers
caused by slippery surfaces,splinters and rusty nails usually found on wooden
walkways.Also it has no sharp comers and is stable enough to walk on.
2.High Compression: Average compression load is over 1000kg per square meter.
3..Versatility:can be used widely in various fields
4.Economy: free maintenance and low up keep
5.Convenience /Simplicity of construction: can be easily quickly installed dismantled
6.Durability:resistant to UV rays,frost,seawater,corrosion,chemicals,and oil.
7.Changeability/Resolvability: one connecting pin holds four modules together
permitting the assembly of any size and any configuration on the water the
assemably can be changed to meet the requirements.
LOGO can be customized:

Load Capacity:
Each one square meter is made up of four pontoons, top load is 350kgs.
Draft without load: 2.5-3cm;
Draft with load of 150kgs: 15-20cm(safe);
Draft with load of 300kgs:35-40cm(load limit)
Anti Wind Wave:
1.The wave on water surface between 2-class and 3-class belongs to safe applicable range.
2.The wave on water surface between 3-class and 6-class can be applicable; however,the safety protection must be reinforced.
3.The wave on water surface between 6-class and 9-class is the restricted applicable range (it is suggested that the shipping shall not be parked and the visitors shall not be in or out).
Attention: to avoid shaking of the dock, the area of internal lake's dock is not less than 30 square meter; the area of stage is not less than 100 square meter.
Anchoring:
1.If water is less than 3m in depth, steel piles are to be put in proper place and then connected by wheels, which can prevent the floating dock from moving laterally but can automatically rise and fall in line with water level.
2.If water is over 3m in depth, anchoring can be used by sinking the anchorage block pulled by steel cables to the water bottom.

Guarantee:
warranty on our floats are 2 years, that is within two years, if there is any damage caused by the product in normal condition, we will replace the floats for you.
Company workshop:

Easy installation:

Pontoon accessories: