Hydro Pneumatic Fender
Design structure:
|
Component |
Function |
|
Rubber fender body |
Heavy-duty rubber structure to withstand marine impact and wear |
|
Water-filled lower section |
Acts as a ballast for submersion and enhances energy absorption |
|
Air-filled upper section |
Allows for elastic deformation and energy absorption from contact |
|
Counterweight |
Ensures vertical orientation of the fender |
|
End flanges/valves |
For filling, draining, and pressurizing (air/water tuning) |
|
Optional chain/support fixtures |
For tethering or mooring at docks or quaysides |
Typical sizes and capacities
|
Fender diameter |
Length |
Energy absorption |
Reaction force |
Submerged depth |
|
1000mm |
1500mm |
20-30 kNm |
100-150 kN |
~70%submerged |
|
2000mm |
3500mm |
200-300 kNm |
350-500 kN |
~75%submerged |
|
3000mm |
5000mm |
600-800 kNm |
800-1000 kN |
~80%submerged |
Note: performance can be adjusted by varying initial air pressure and water volume. Common pressure settings range between 50-80 kPa (0.5-0.8 bar).
Product Introduction
A hydro-pneumatic fender is a cylindrical rubber marine fender partially filled with water and air, engineered to float vertically in the water. It is a specialized marine fender designed to protect submarines and other vessels with low freeboards and high drafts during berthing operations. Unlike standard pneumatic fenders, hydro-pneumatic fenders are partially filled with water and air and are equipped with a counterweight to maintain a vertical position. This configuration ensures that the submerged hull of a vessel is properly protected at all times. It is used in specialized docking applications--especially for submarines and floating structures--where traditional floating fenders cannot provide adequate underwater hull protection.
Other Name: Pneumatic Fender with tire protection net; Yokohama Fenders;
Typical applications of hydro-pneumatic fender:
·Submarine berthing: it is primarily used for berthing submarines, ensuring protection below the waterline.
·Semi-submersible oil rigs: it is also suitable for use in ports and shipyards where vessels may contact fixed structures or other vessels below the waterline.
·Fast ferries and catamarans: it is applicable for vessels with low freeboards that require protection during docking.
We can also provide customized Hydro Pneumatic Fender according to your drawings or demands.

Advantage
Ship-to-Ship (STS) Transfer: Used between two vessels during cargo operations.
Berthing & Mooring: Protects docks, piers, and offshore platforms.
Temporary Marine Operations: Deployed in salvage operations or as temporary buffers.
Pneumatic fenders with tire net configuration details:

Parameters
Material: ·Outer Rubber Body: natural rubber or synthetic rubber compounds (typically SBR, NR, or EPDM). Often includes nylon or polyester tire-cord fabric layers for added strength.·Inner Liner: rubberized airtight layer (often butyl or chlorobutyl rubber)·End flanges: hop-dip galvanized steel or marine-grade stainless steel·Counterweight: steel, often coasted with corrosion-resistant epoxy paint or rubber-clad
Optional: chain and shackles, protective net or cover
Certificate: ABS, DNV, LR, BV, CCS, and other classification society standards
Customized service is available
Hot Tags: hydro pneumatic fender, China hydro pneumatic fender manufacturers, suppliers, factory, pneumatic fender, Pneumatic Fenders for Ships, Pneumatic Marine Fenders
Previous
No InformationYou Might Also Like
Send Inquiry












